Tag: cutter


PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

July 19th, 2018 — 12:25am
PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs

Contact with STAHLWERK Welding Machines. TIG AC/DC Welders with Pulse & Plasma Cutting. ARC-Stick, Alu welding, Plasma cutting up to 12 mm. TIG AC/DC Welders with Pulse. MMA ARC-Stick, Alu welding. TIG DC Welders with Pulse & Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 12 mm. TIG DC Welders with Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 14 mm. TIG DC Welders with Pulse. Cutting up to 12-40 mm. DC MIG, MAG, TIG, MMA ARC-Stick. Over 100000 satisfied customers in Germany, Europe and Switzerland. Test welding & plasma cutting: convince yourself of our high quality! Compact, lightweight construction with the greatest possible mobility. Small cutting width. Cutting power up to 12 mm. Accurate and very stable arc. Powerful cutting speed which ensures high productivity. Plasma Cutter STAHLWERK CUT 50 S + Plasma accessories 32 pcs. Stability for maximum performance! A professional cutter for everyday use! Conviction through excellent cutting quality! With the integrated Plasma cutter CUT 50 S can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). CUT contact – Absolutely easy-to-use HF high-frequency contact ignition. A light stroke over the workpiece is sufficient. Gas post-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation. Gas/air post-flow time adjustable with 2 switching steps: 2.5 S and 5.0. Smart Cooling Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. Cutting power up to 12 mm material thickness (depending on material). With all our devices, we trust in MOSFET technology from Toshiba , whose innovative solutions set new standards in welding technology. S-Guard-Housing is ergonomic, robust and operationally reliable: – Sturdy sheet steel housing, – Shock-proof, – Hard plastic formwork, – Control panel conveniently accessible and easier to operate, – Intelligent fan guide. The single-phase alternating current is to be protected in the household with a 16 A fuse. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. Excellent quality due to fully digital inverter technology The welding machine Profi-Plasmaschneider CUT 50 S has the most advanced inverter technology MOSFET (Toshiba). The resultant special features such as high speed and precision of the control give the devices their excellent quality in welding and cutting. The Plasma cutter CUT 50 S is characterized by the following features. Power Plasma cutter adjustable between 10 50 A. Construction steel ST37 up to 12 mm. V2a up to 10 mm. Aluminum up to 7-8 mm. Gas post flow Automatically controlled air afterflow time for the cooling system. Overheat protectio Overheat protection goes on when the unit is overloaded. Safety degree of protection by enclosure IP21: – Protection against foreign material. Protected against solid foreign material with a diameter of 12,5 mm or mor. Protection against touch: Protected against access with a finger. Protection against water: Protection against dripping water. Advantages – Digital display. Small cutting width. Good cutting quality. Pilot arc – non contact. Switch integrated in handle. Precise and very stable arc. High duty cycle of 60% at 50 A. Intelligent housing design with optimized airflow. Clean cuts which do not require post-processing. Powerful cutting speed, ensuring high productivity. Maximum energy density with minimized heat distortion. No material distortion due to heat metal waste is minimized. A plasma beam that cuts any electrically conductive meal effortlessly. Due to the low deformation, thin sheets can be welded together again immediately. Low operating costs due to the use of air plasma instead of expensive gases compressed air is used. The long-lasting design and the demanding welding properties of the machines ensure a reliable daily use for the production welding work. S-Guard housing robust and reliable. Robust steel-sheet housing. Hard plastic casing protects against damage. High ED (duty cycle) by intelligent fan control. Modern housing shape. The control panel is clear and ergonomic at the front. All settings are comfortable, accessible and easier to operate. Comfortable setting of the welding parameters via function selection and control dial. Inverter welding machine The welding inverter is an electronic welding current source. Inverter welding machines are built for all arc welding processes such as electrode, MIG/MAG, plasma and TIG welding. Depending on the power, the devices are connected one or three phases to the electric circuit. Output current Plasma / CUT. 60% at 50 A / 100% at 30 A. Cutting thickness (material dependent). Degree of protection by enclosure. 230 V AC (+-15%) / 1 (single phase). Mains fuse (delay fuse). 1 x 16 A. Dimensions Length x Width x Height (mm). 380 x 165 x 320. IEC 60 974-1 ; CE. Technical requirements Plasma / CUT Compressor. To 4,5 Bar. An air compressor with at least 4.5 bar is required for cutting. A commercial building market compressor is also sufficient. Please pay attention to the performance. Make sure that the ground terminal and the workpiece have a good electrical contact; This applies in particular to painted or oxidized metal sheets and to metal sheets with an insulating coating. Do not attach the ground clamp to the workpiece that is to be separated. Maintenance of the cutting current source. Caution : To ensure proper functioning of the appliance, the appliance must be cleaned at regular intervals with the compressed air from the accumulated metal dust. The Mettal dust can cause short circuits, which could lead to the guarantee being voided. The machine STAHLWERK CUT 50 S. Plasma hose “AG-60″ 4,50 meter. Plasma accessories set 3-part (installed them each one piece already in the hose package). 1 nozzle (already at the plasma torch). 1 electrode (already at the plasma torch). 1 ceramic cap (already at the plasma torch). Water separator with manometer. Connection tube, 3 meter. Earth cable, 3 meter. Plasma accessories set 32-parts. 14 nozzle (already at the plasma torch). 14 electrode (already at the plasma torch). 4 ceramic cap (already at the plasma torch). This is free for you. We want to avoid transport damage. Although both packages leave our house at the same time, in some cases, the machine comes first and the accessories are delivered one day later. This is not the rule, but it happens. In our Shop you will find everything about welding and cutting equipment includes stick welders, TIG welders, MIG welders, multi-process welders, plasma cutters, also welding accessories and welding protective clothing. The Company STAHLWERK Schweißgeräte Deutschland e. We are your professional and reliable welding specialist. In STAHLWERK welding machines you have the latest inverter technology. Highest quality standards in a premium brand and low prices to a product-performance-ratio. With which process you also weld or cut AC, DC, MIG MAG, MMA or CUT the STAHLWERK products range leaves nothing to be desired. In particular, it relates to the circuit board and the inverter. It does not extend to the housing and its external components and connecting parts, such as the hose pack or the mass clamp. It also does not extend to the supplied accessory, which is not used in the device interior. In order to ensure optimum support for our customers, our very motivated employees are always available to answer any questions. Our employees are constantly trained and updated to the latest state of technical developments. This is a service that you can also personally convince yourself of here at any time. Visit us – We would like to invite you to a test welding in our company at Bonn. Convince yourself of our service! Sample welding on site possible. Your Safety & Satisfaction. Consulting by professional staff. Alle Urheberrechte sind vorbehalten. Konzept & Design: AGETARE. The item “PLASMA CUTTER CUT 50 S HF INVERTER WELDING MACHINE + Plasma accessories 32 pcs” is in sale since Wednesday, July 9, 2014. This item is in the category “Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Plasma Cutting Accessories\Plasma Cutter Kits”. The seller is “*www.stahlwerk-schweissgeraete.de*” and is located in Weilerswist. This item can be shipped to European Union member countries.
  • Brand: STAHLWERK
  • MPN: EU1218
  • GTIN: 4260294082182
  • ORIGINAL: DIRECT FROM MANUFACTURER
  • QUALITY BRAND: 5 YEARS WARRANTY
  • EAN: 4260294082007

Comments Off | plasma

Hobart AirForce 27i Plasma Cutter with 12ft Torch (500565)

July 16th, 2018 — 12:06am
Hobart AirForce 27i Plasma Cutter with 12ft Torch (500565)

Hobart AirForce 27i Plasma Cutter with 12ft Torch (500565)

Hobart AirForce 27i Plasma Cutter with 12ft Torch (500565)

Hobart AirForce 27I Plasma Cutter with 12ft Torch (500565). The Hobart AirForce 27i Plasma Cutter with 12ft Torch (500565) is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP). Cut faster and more precise than Oxy Fuel. Thanks to a smaller heat-affected zone you have less warping as well. Highlights: New Inverter Design offers powerful cutting ability at half the weight of prior model (AirForce 500). Weighs only 27.8 lbs. Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outlet of 6 kW or more. New XT30R Ergonomic Torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips. Multi-Voltage Plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools, simply choose the plug that fits the receptacle. Post-flow Air Cooling cools the torch and tip after cutting, extending life of replaceable tip and electrode. Fan-On-Demand runs only when needed, reducing dust/debris pulled into unit. Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components. Thermal Overload Protection is built to withstand tough working environments. Rated for 35% duty cycle at 104 degrees Fahrenheit. Duty cycle will increase as environmental temperature decreases. Cable Management Strap secures torch, work cable and power cord to make transporting easy and convenient. Line Voltage Compensation (LVC) provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts. Power Factor Correction expands operators work area via extension cords while minimizing nuisance trips caused by voltage drops. Cut faster than oxy fuel. Material: Aluminum, Mild Steel, Stainless Steel, Titanium. Input Voltage: 115, 230. Rated Cut: 1/2 inch. The IOC in Welding Supplies stands for Indiana Oxygen Company. IOC has been a leader in the welding and gas industry since 1915, making us the oldest independently owned Welding Supply Company in the county. After all these years, were still a family owned company that is passionate about customer service and the products we sell. We like to think that we have some of the most knowledgeable customer service reps in the industry. The item “Hobart AirForce 27i Plasma Cutter with 12ft Torch (500565)” is in sale since Monday, November 3, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Welding & Soldering\Welding\Welders, Cutters & Torches\Plasma Cutters”. The seller is “weldingsuppliesatioc” and is located in Indianapolis, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Panama, Jamaica.
  • Model: Airforce 27I
  • MPN: 500565
  • Brand: Hobart

Comments Off | hobart

60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge

July 15th, 2018 — 12:01am
60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge

60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge

60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge

60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge

60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge

60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 W/Gauge. Cutting Stainless steel, Alloy steel, mild steel, copper and other metal material. Rated input capacity(KVA). Rated output voltage(V). Rated duty cycle(%). 19″ x 8″ x 12-1/2. Included: CUT-60 Plasma Cutter, 1.5M Earth Clamp, 4M Cutting Torch, Regulator, Brush, Mask, 1 set Tips for Cutting Torch. Power cord included but does not come with 220v Plug. SOME PARTS ON PICTURE ARE NOT INCLUDED. Please make sure you order the correct item as orders cannot be altered after the order is paid for. 5-8 days to your door, we do not guarantee transit time. Excluded AK, HI, PR, APO, GUAM, VI, or PO Box. The flat rates quoted in the table will apply to most destinations in the countries/states listed. Occasionally (usually, but not always in remote/rural areas), some addresses will not qualify for the service or rates that are quoted. We reserve the right to cancel an order or terminate a sale for any reason. All items are 100% brand-new, and not refurbished in any way, unless the listing specifically states otherwise. Boxes may be opened for the purpose of testing, inspecting, photographing, adding additional padding/packaging/instruction supplements, or ensuring the completeness of the item. Customers must return all items in their original condition which include the original Packaging accompanied with packing slip, Documentation & Manuals and Accessories, etc. We welcome and treasure all of our customers. Listing and template services provided by inkFrog Open. The item “60 Amp 220V Digital Inverter DC Air Plasma Cutter 23mm Cut Machine CUT60 WithGauge” is in sale since Friday, April 18, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Welding & Soldering\Welding\Welders, Cutters & Torches\Plasma Cutters”. The seller is “econoestore” and is located in Rowland Heights, California. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Model: CUT60
  • MPN: Does Not Apply
  • UPC: Does not Apply

Comments Off | 220v

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

July 9th, 2018 — 11:20pm
WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER

Contact with STAHLWERK Welding Machines. TIG AC/DC Welders with Pulse & Plasma Cutting. ARC-Stick, Alu welding, Plasma cutting up to 12 mm. TIG AC/DC Welders with Pulse. MMA ARC-Stick, Alu welding. TIG DC Welders with Pulse & Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 12 mm. TIG DC Welders with Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 14 mm. TIG DC Welders with Pulse. Cutting up to 12-40 mm. DC MIG, MAG, TIG, MMA ARC-Stick. Over 100000 satisfied customers in Germany, Europe and Switzerland. Test welding & plasma cutting: convince yourself of our high quality! Professional welding machine with integrated plasma cutter. Ideal for welding aluminium and thin metal sheets. Direct current- and alternating current TIG welding. TIG Pulse-function – for thin sheets from 0.8 mm. MMA/ARC-Stick- electrode welding. Cutting power up to 12 mm. STAHLWERK AC/DC WIG 200 Pulse with Plasma Cutter. AC / DC TIG welding devices with pulse function are suitable for welding almost all materials (steel, stainless steel including aluminum). In addition, the devices in this category are combiners with integrated plasma cutter. Adjustable functions and important device elements. AC/DC WIG welding direct current- and alternating current. Welding of almost all materials (also aluminium). HF Ignition high-frequency ignition (HF) by TIG – TIG High Frequency. Reproducible welding results by HF ignition and constant welding parameters at start-up. Remote controllable current control with foot pedal (not included). Hast he advantage, that the current can be also regulated during the welding process. Gas pre-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation. Gas post-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation. With the switch 2T/4T the operating modes oft he control can be determined. This mode provides extended control over the current flow. The start current specifies the current which is used at the start of the ignition before it switches to the set welding current. End current specifies the current that is applied at the end of the ignition before the ignition is extinguished. After the arc has been completely ignited, the welding process changes into a current rise phase in which the welding current is raised linearly from the set starting current value to the desired welding current value. Down slope prevents piping (end craters) at the end of the weld. After the button on the burner has been released, the machine switches to an automatic current lowering phase. Downslope works only in 4T mode. TIG PULSE – Prevents the burning of materials and reduces deformation due to heat. TIG-PULS function is particularly suitable for welding thin plates, the material of which may be heated only slightly. MMA/ARC-Stick Electrode welding can be used under almost all conditions and therefore MMA welding can be described as a universal process in the welding industry. Anti-Stick -function prevents sticking of the stick electrode. In the case of a sticking of the electrode to the workpiece, the welding current is switched off. ARC Force with spray arc, also called ARC Force. This allows to regulate the arc range. Hotstart automatic voltage increase at start-up for better welding results. With the integrated Plasma Cutter 50 A can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). CUT contact – Absolutely easy-to-use HF high-frequency contact ignition. A light stroke over the workpiece is sufficient. With all our devices, we trust in MOSFET technology from Toshiba , whose innovative solutions set new standards in welding technology. High Performance Cooling through two high-speed fans. Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. The single-phase alternating current is to be protected in the household with a 16 A fuse. S-Guard-Housing is ergonomic, robust and operationally reliable: – Sturdy sheet steel housing, – Shock-proof, – Hard plastic formwork, – Control panel conveniently accessible and easier to operate, – Intelligent fan guide. Professional machine for daily use AC DC TIG with pulse function and MMA welding, or plasma cutting. Power – TIG / MMA adjustable between 100 200 A – Plasma cutter adjustable between 10 50 A, cutting performance up to 12 mm (depending on the material). AC DC welding machine For non-alloyed and low alloy steels, stainless steel, copper, brass etc. As well as for light metals for example aluminum. Gas cooled Hose package gas air cooled. Excellent quality due to fully digital inverter technology The welding machine AC DC 200 PULSE with PLASMA has the most advanced inverter technology MOSFET (Toshiba). The resultant special features such as high speed and precision of the control give the devices their excellent quality in welding and cutting. Safety degree of protection by enclosure IP21: – Protection against foreign material. Protected against solid foreign material with a diameter of 12,5 mm or mor. Protection against touch: Protected against access with a finger. Protection against water: Protection against dripping water. Inverter welding machine The welding inverter is an electronic welding current source. Inverter welding machines are built for all arc welding processes such as electrode, MIG/MAG, plasma and TIG welding. Depending on the power, the devices are connected one or three phases to the electric circuit. The control technology fits different Applications and greatly improves the welding performance. AC DC AC alternating current (deutsch: Wechselstrom). For light metal, for example aluminum and so on. Used for break-up of the oxide film from the surface of aluminum and the filler metal DC direct current. DC direct current (deutsch: Gleichstrom). For non-alloyed and low alloy steels, stainless steel, copper, brass and so on. Power shift Only important for aluminum welding. The power shift respectively a displacement of the current to positive or negative wave movement of the current. This reduced the weld penetration. TIG (tungsten inert gas) is one of most important welding for processing of high-alloy steel and all non-ferrous metals. HF high-frequency ignition High frequency arc ignition (HF) at TIG. A High frequency removal advance the sparking distance between the electrode and the workpiece. There is no direct contact between the tungsten electrode and the workpiece. The tungsten electrode does not touch the work piece so the tungsten will be prevented and the weld is not exposed any tungsten attack. Touchless ignition works in different work configurations with high reliability. Remote controllable Remote controllable current control via foot pedal. The foot control mode gives you the advantage that you can control the current even during the welding process, which gives you various possibilities for the execution of the welding work. Gas pre-flow Adjustable between 0 2 seconds. Protects the tungsten electrode from excessive wear and protects the weld from oxidation. Gas post flow Adjustable between 0 10 seconds. Important to protect the welding seam from aeration and to create a gas atmosphere. 2T / 4T In the 2 stroke mode, the button of the TIG hose pack must remain pressed. When the button is released, the arc goes out. At 4 stroke mode, after pressing and releasing the button of the TIG hose pack, the arc remains stable. The arc is extinguished only by pressing the torch again. Note: In the 4T mode, the set welding current is not displayed until the display is activated. That device has some features “Start current”, “Closing current”, “Current rise” and “Current reduction” which can only be used in 4T mode. Start current Specifies the current used at the start of the ignition before it switches to the set welding current. Closing current Indicates the current at the end of the ignition before the ignition goes out. Slope up (Current rise) After the arc has been completely ignited, the welding process changes into a current rise phase in which the welding current is raised linearly from the set starting current value to the desired welding current value. The duration of this phase is adjustable from 0 to 10 seconds. Slope down (Current reduction) The current reduction prevented end crater at the end of the weld. After the button is released, the machine switches to an automatic current reduction phase. During this phase, the current is lowered from the set value for welding current into the closing current. Down Slope can only be set by 4 stroke mode (4 T). Welding with pulsating current a further development of TIG welding. Pulse TIG pulse function is particularly suitable for welding thin plates, the material of which may be heated only slightly. The increased arc stability allows better welding precision. With this function you can weld deeper into the workpiece (10mm) without getting to hot. A burning of the workpiece is prevented and a clean and stable weld is the result. In TIG pulse welding, the welding current pulsates between a basic and pulse current with variable frequencies, base- and impulse height and width. The pulse frequency, the pulse width and pulse height can be set separately from each other. Impulse current Adjustable between 10 200 A – Due to the strong pulse current a deep penetration is ensured. Due to a weak background current, the weld pool becomes smaller and easier to control. Pulse frequency Adjustable between 0,5 200 Hz. Thus variable pulse frequency is controlled. Increased pulse frequency increases arc stability and welding precision. Pulse width Adjustable between 10 90%. Fine adjustable control of the distance between the impulsing. Pulse TIG is divided into two main areas. Rapid pulse (RP) – Recommended for metal plates from 3,0 mm. Low heat input. Arc looks like in continuous tungsten inert welding. Sound level is higher (because of the high pulse frequency). Particularly suitable for materials with low thermal conductivity (iron, stainless steel). Better welding speed than the continuous TIG. Less deformation than a continuous TIG. Long pulse (LP) : – Recommended for thin metal plates up to 3,0 mm. Two visually distinct periods, impulse and background. Better weld pool control than in continuous tungsten inert welding. Welding deviating from position. Wider weld, addition of filler wire during the pulse current dropwise technique. Lower heat input than continuous tungsten inert welding. Weld with good optical appearance. All our TIG welding machines are also suitable for MMA / E-hand welding. Anti-stick Shortly before the end, the system releases the set maximum current, which prevents sticking and annealing of the electrode. The electrode does not glow and can easily be detached from the workpiece. ARC force With spray arc, also called ARC force, can be regulated the arc width. Hotstart Prevents the sticking of the stick electrode by short-term superimposition of the set welding current and warms up the weld seam start faster. Integrated plasma cutter CUT 50 A. PLASMA / CUT With the integrated CUT 50 A, you can cut without problems all conductive metals, for example aluminum, steel, copper, brass, titanium and so on (depending on material). Small cutting width. Good cutting quality. Switch integrated in handle. Precise and very stable arc. High duty cycle of 60% at 50 A. Maximum energy density with minimized heat distortion. Clean cuts which do not require post-processing. Intelligent housing design with optimized airflow. No material distortion due to heat metal waste is minimized. A plasma beam that cuts any electrically conductive meal effortlessly. Powerful cutting speed, ensuring high productivity. Due to the low deformation, thin sheets can be welded together again immediately. Cutting performance up to 12 mm (material dependent): Construction steel ST37 up to 12 mm, V2a up to 8 mm, aluminum up to 7 8 mm. Low operating costs due to the use of air plasma instead of expensive gases compressed air is used. Overheat protectio Overheat protection goes on when the unit is overloaded. Output current Plasma /CUT. 60% bei 200 A. Einschaltdauer MMA / ARC. 60 % at 200 A. Duty cycle Plasma /CUT. 60 % at 50 A. Cutting thickness (material dependent). Degree of protection by enclosure. 230 V AC (+-15%) / 1 (single phase). Mains fuse (delay fuse). 1 x 16 A. > 7 kVA / 1. Dimensions Length x Width x Height (mm). 610 x 320 x 520. IEC 60 974-1 ; CE. Technical requirements Plasma / CUT Compressor. Bis 4,5 Bar. The machine Stahlwerk AC DC 200 Pulse with Plasma. AG 60 plasma hose, 4,5 meter. Plasma accessories set 3-part (installed them each one piece already in the hose package). 1 nozzle (already at the plasma torch). 1 electrode (already at the plasma torch). 1 ceramic cap (already at the plasma torch). TIG Torch Package “WP-26″ 4,5 m. TIG accessories (installed them each one piece already in the hose package). 4 gas nozzles, each 1 piece in size 4,5,6,7. 4 adapter sleeves, each 2 pieces in 1,6 and 2,4. 4 collet body, each 2 pieces in 1,6 and 2,4. 1 long back cap. 1 short back cap. 1 universal tungsten electrode. Water separator with manometer. Connection tube 3 meter. Earth cable 3 meter. Cable with electrode holder 3 meter. This is free for you. We want to avoid transport damage. Although both packages leave our house at the same time, in some cases, the machine comes first and the accessories are delivered one day later. This is not the rule, but it happens. In our Shop you will find everything about welding and cutting equipment includes stick welders, TIG welders, MIG welders, multi-process welders, plasma cutters, also welding accessories and welding protective clothing. The Company STAHLWERK Schweißgeräte Deutschland e. We are your professional and reliable welding specialist. In STAHLWERK welding machines you have the latest inverter technology. Highest quality standards in a premium brand and low prices to a product-performance-ratio. With which process you also weld or cut AC, DC, MIG MAG, MMA or CUT the STAHLWERK products range leaves nothing to be desired. In particular, it relates to the circuit board and the inverter. It does not extend to the housing and its external components and connecting parts, such as the hose pack or the mass clamp. It also does not extend to the supplied accessory, which is not used in the device interior. In order to ensure optimum support for our customers, our very motivated employees are always available to answer any questions. Our employees are constantly trained and updated to the latest state of technical developments. This is a service that you can also personally convince yourself of here at any time. Visit us – We would like to invite you to a test welding in our company at Bonn. Convince yourself of our service! Sample welding on site possible. Your Safety & Satisfaction. Consulting by professional staff. Alle Urheberrechte sind vorbehalten. Konzept & Design: AGETARE. The item “WELDER STAHLWERK AC/DC TIG 200 PULSE a. PLASMA CUTTER WELDING MACHINE INVERTER” is in sale since Thursday, November 30, 2017. This item is in the category “Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Welders, Cutters & Torches\Multiprocess Welders & Cutters”. The seller is “*www.stahlwerk-schweissgeraete.de*” and is located in Weilerswist. This item can be shipped to European Union member countries.
  • GTIN: 4260294080119
  • QUALITY BRAND: 5 YEARS WARRANTY
  • ORIGINAL: DIRECT FROM MANUFACTURERS
  • Brand: STAHLWERK
  • MPN: EU1011
  • EAN: 4260294080119

Comments Off | welder

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

July 7th, 2018 — 10:58am
PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm

Contact with STAHLWERK Welding Machines. TIG AC/DC Welders with Pulse & Plasma Cutting. ARC-Stick, Alu welding, Plasma cutting up to 12 mm. TIG AC/DC Welders with Pulse. MMA ARC-Stick, Alu welding. TIG DC Welders with Pulse & Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 12 mm. TIG DC Welders with Plasma Cutting. MMA ARC-Stick, Plasma cutting up to 14 mm. TIG DC Welders with Pulse. Cutting up to 12-40 mm. DC MIG, MAG, TIG, MMA ARC-Stick. Over 100000 satisfied customers in Germany, Europe and Switzerland. Test welding & plasma cutting: convince yourself of our high quality! Compact, lightweight construction with the greatest possible mobility. Small cutting width. Cutting power up to 14 mm. Accurate and very stable arc. Powerful cutting speed which ensures high productivity. Plasma Cutter STAHLWERK CUT 50 ST. A professional cutter for everyday use. Conviction through excellent cutting quality. Plasma cutting up to 14 mm thickness possible. Compact design, very handy and easy to transport. Adjustable functions and important device elements. With the integrated Plasma Cutter CUT 50 ST can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on. Cutting power up to 14 mm Material thickness (depending on material). Construction steel ST37 up to 14 mm, V2a up to 8 mm, Aluminum up to 5 mm. CUT contact – Absolutely easy-to-use HF high-frequency contact ignition. A light stroke over the workpiece is sufficient. Smart Cooling Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. The single-phase alternating current is to be protected in the household with a 16 A fuse. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. ST-Guard-Housing is ergonomic, robust and operationally reliable: – Sturdy sheet steel housing, – Shock-proof, – Hard plastic formwork, – Control panel conveniently accessible and easier to operate, – Intelligent fan guide. The Plasma cutter CUT 50 ST is characterized by the following features. Small cutting width. Good cutting quality. Switch integrated in handle. Precise and very stable arc. High duty cycle of 60% at 50 A. Intelligent housing design with optimized airflow. Clean cuts which do not require post-processing. Powerful cutting speed, ensuring high productivity. Maximum energy density with minimized heat distortion. No material distortion due to heat metal waste is minimized. A plasma beam that cuts any electrically conductive meal effortlessly. Due to the low deformation, thin sheets can be welded together again immediately. Low operating costs due to the use of air plasma instead of expensive gases compressed air is used. Cutting performance up to 14 mm (material dependent): Construction steel ST37 up to 14 mm, V2a up to 8 mm, Aluminum up to 5 mm. An air compressor with at least 4,5 bar is required for cutting. A commercial building market compressor is also sufficient. Please pay attention to the performance. Make sure that the ground terminal and the workpiece have a good electrical contact; This applies in particular to painted or oxidized metal sheets and to metal sheets with an insulating coating. Do not attach the ground clamp to the workpiece that is to be separated. Maintenance of the cutting current source. Caution : To ensure proper functioning of the appliance, the appliance must be cleaned at regular intervals with the compressed air from the accumulated metal dust. The Mettal dust can cause short circuits, which could lead to the guarantee being voided. The control technology fits different Applications and greatly improves the welding performance. ST-Guard housing robust and reliable. Shock-proof – Robust steel-sheet housing – Hard plastic casing protects against damage – High ED (duty cycle) by intelligent fan control – Intelligent housing design with optimized airflow. Modern housing shape – The control panel is clear and ergonomic at the front – All settings are comfortable, accessible and easier to operate – Comfortable setting of the welding parameters via function selection and control dial – Ergonomically arranged operating elements allow for high-quality welding processes and lead to an optimal working results. Safety degree of protection by enclosure IP21. Protection against foreign material. Protected against solid foreign material with a diameter of 12,5 mm or more – Protection against touch: Protected against access with a finger – Protection against water: Protection against dripping water. Inverter welding machine The welding inverter is an electronic welding current source. Inverter welding machines are built for all arc welding processes such as electrode, MIG/MAG, plasma and TIG welding. Depending on the power, the devices are connected one or three phases to the electric circuit. Output current Plasma / CUT. 60 % at 50 A / 100 % at 30 A. Cutting thickness (material dependent). To 4,5 Bar. Degree of protection by enclosure. 230 V AC (+-15%) / 1 (single phase). Mains fuse (delay fuse). 1 x 16 A. Dimensions Length x Width x Height (mm). 465 x 275 x 330. IEC 60 974-1; CE. The machine Plasma Cutter STAHLWERK CUT 50 ST. Plasma hose “AG-60″ / “SG-55″ 5 meter. Plasma accessories set 3-part (installed them each one piece already in the hose package). 1 nozzle (already at the plasma torch). 1 electrode (already at the plasma torch). 1 ceramic cap (already at the plasma torch). Water separator with manometer. Earth cable 3 meter. In our Shop you will find everything about welding and cutting equipment includes stick welders, TIG welders, MIG welders, multi-process welders, plasma cutters, also welding accessories and welding protective clothing. The Company STAHLWERK Schweißgeräte Deutschland e. We are your professional and reliable welding specialist. In STAHLWERK welding machines you have the latest inverter technology. Highest quality standards in a premium brand and low prices to a product-performance-ratio. With which process you also weld or cut AC, DC, MIG MAG, MMA or CUT the STAHLWERK products range leaves nothing to be desired. In particular, it relates to the circuit board and the inverter. It does not extend to the housing and its external components and connecting parts, such as the hose pack or the mass clamp. It also does not extend to the supplied accessory, which is not used in the device interior. In order to ensure optimum support for our customers, our very motivated employees are always available to answer any questions. Our employees are constantly trained and updated to the latest state of technical developments. This is a service that you can also personally convince yourself of here at any time. Visit us – We would like to invite you to a test welding in our company at Bonn. Convince yourself of our service! Sample welding on site possible. Your Safety & Satisfaction. Consulting by professional staff. Alle Urheberrechte sind vorbehalten. Konzept & Design: AGETARE. The item “PLASMA CUTTER STAHLWERK CUT 50 ST INVERTER / Cutting power up to 14mm” is in sale since Saturday, May 5, 2018. This item is in the category “Business, Office & Industrial\Industrial Tools\Cutting & Sawing Tools\Cutters”. The seller is “*www.stahlwerk-schweissgeraete.de*” and is located in London. This item can be shipped to European Union member countries.
  • GTIN: 4260294082113
  • ORIGINAL: DIRECT FROM MANUFACTURERS
  • QUALITY BRAND: 5 YEARS WARRANTY
  • Brand: STAHLWERK
  • MPN: 1765
  • EAN: 4260294087651

Comments Off | plasma

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

July 4th, 2018 — 10:38pm
60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting

HF Plasma Cutter CUT60 60AMP 230V & Consumables. 60 AMP 230V PLASMA CUTTER – 2018 MODEL w POWER SG55(AG60) TORCH. TRUE 60AMP HF Start PLASMA CUTTER. DIGITAL DIPLAY AND CE. EMC, LVD, C-TICK SAFETY STANDARDS!! BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES! Plasma cutter CUT 60. Can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). Absolutely easy-to-use HF high-frequency contact ignition. A light stroke over the workpiece is sufficient. Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. Cutting power up to 18 mm. Material thickness (depending on material). With all our devices, we trust in IGBT. Whose innovative solutions set new standards in welding technology. The single-phase alternating current is to be protected in the. Household with a 16 A fuse. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. The item “60A DIGITAL Plasma Cutter icut60 240V & AG60 TORCH &16mm cut IGBT plasma cutting” is in sale since Tuesday, October 27, 2015. This item is in the category “Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Welders, Cutters & Torches\Plasma Cutters”. The seller is “hightechwz” and is located in Leicester. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: TS

Comments Off | digital

9 Pc Woodruff Key Cutter Bit Keyseat Keyset For Milling Machine Tool Tooling

July 3rd, 2018 — 10:31pm
9 Pc Woodruff Key Cutter Bit Keyseat Keyset For Milling Machine Tool Tooling

Description: This HSS 1/2″ shank set with wooden tray includes: 3/16″ x 1″, 1/4″ x 3/4″, 3/16″ x 3/4″, 1/8″ x 3/4″, 5/32″ x 5/8″, 3/32″ x 5/8″, 1/16″ x 1/2″, 1/8″ x 1/2″ & 1/8″ x 3/8 cutters. You may return the product within 30 days of receipt. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed. The item “9 PC WOODRUFF KEY CUTTER BIT KEYSEAT KEYSET FOR MILLING MACHINE TOOL TOOLING” is in sale since Tuesday, December 17, 2013. This item is in the category “Home & Garden\Tools\Hand Tools\Mixed Tool Sets”. The seller is “j-rqualitytools2011″ and is located in Vancouver, Washington. This item can be shipped worldwide.
  • MPN: M1082
  • Brand: na

Comments Off | woodruff

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

June 29th, 2018 — 9:57am
Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut

50 AMP 240V PLASMA CUTTER – 2018 MODEL w POWER PT31 TORCH. TRUE 50AMP HF Start PLASMA CUTTER. DIGITAL DIPLAY AND CE. EMC, LVD, C-TICK SAFETY STANDARDS!! BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES! Plasma cutter CUT 50. Can be cut without problems all conductive metals. For example: aluminum, steel, copper, brass, titanium and so on (depending on material). Absolutely easy-to-use HF high-frequency contact ignition. A light stroke over the workpiece is sufficient. Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit. Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again. Cutting power up to 14 mm. Material thickness (depending on material). With all our devices, we trust in. Whose innovative solutions set new standards in welding technology. The single-phase alternating current is to be protected in the. Household with a 16 A fuse. The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation. The item “Plasma cutter 50A CUT50 Inverter DIGITAL & accessories 240V & torches 1-14mm cut” is in sale since Tuesday, May 29, 2018. This item is in the category “Business, Office & Industrial\Metalworking/Milling/Welding\Welding & Soldering\Welding\Welders, Cutters & Torches\Plasma Cutters”. The seller is “hightechwz” and is located in Leicester. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: HIWAY

Comments Off | plasma

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

June 28th, 2018 — 9:54pm
Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V

Plasma arc cutting machine features the latest technology, it is perfect for the processing of metal materials machinery. The Plasma Cutting is equipped with a high quality Plasma Torch developed specifically to enhance and improve the cut quality. It is suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The cutting machine not only use in businesses and DIY (do-it-yourself) users but also fully accommodating the demands of professional operators. The machine has no plugs and is self-installing. MOSFET inverter soft switch, DC output. Simple operation, smooth cutting surface. Digital LCD display, easy read front panel air-pressure guage. Thick metal plate can be cut easily and quickly -Suitable for cutting stainless steel, copper, iron and aluminium metal etc. Cutting capacity increased 1.8 times higher in cutting speed compare with flame cutter. Simple to use torches with inexpensive service parts and consumables. Over current and air pressure light indicators keep you updated on your units operating condition. Save energy and no noise, high cutting speed, cutting smoothly and no polish demands. Voltage input 220V, strong interference resistance, stable cutting current and steady arc. Ontinuous current regulation, waterproof, shield from electric shock and corrosion-resisting, safety and reliable. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, cleaner cut. Air pressure: 0.4Pa. Rated input current: 24 A. Power supply voltage :220V/50Hz. Power supply capacity: 5.5KVA. Arc striking model: Touch. Packing dimensions(cm):494028. 1 x Plasma Cutter. 1 x Cutting Gun. 1 x Grounding Clamp. 1 x Pressure Reducing Valve. 3 x Cutting Accessories. 2 x Throat Hoop. 2 x Connect The Gas Head. Wir haben Lager in Gröbritannien und Irland. Für jene Kunden, die in Gröbritannien, DE und EU leben, senden wir Artikel aus dem entsprechenden Lager. Estimierte Lieferung 2-4 Werktage an wichtige Standorte, 4-7 Werktage an abgelegene Gebiete. Wenn Artikel aus dem Deutschland-Lager versandt werden, ist die Adresse, die folgende Postleitzahlen enthölt, nicht lieferbar. Nordirland: BT1-82, BT92-94, Isle of Man: IM1-9, Isles of Scilly: TR21-23. Orkney-Inseln: KW1-17, Shetlandinseln: ZE1-3. Hebriden und Schottischen Hochland: HS1-9, IV1-28, IV 36, IV40-56, IV63, KA 27-28, PA20-38, PA41-78, PH19-26, PH31-44. 1156AA-1156ZZ, 1791AA-1797ZZ, 8881AA-8884ZZ, 8891AA-8897ZZ, 8899AA-8899ZZ, 9161AA-9164ZZ, 9166AA-9166ZZ. Dieser Artikel kommt mit drei Jahren Garantie. Wenn Ihr Artikel in einem anderen Zustand als beschrieben empfangen wird, kontaktieren Sie uns bitte für eine sofortige Lösung. Alle unsere Artikel kommen mit einer 30-Tage Geld-zurück-Garantie, Köufer zahlen für Rücksendung Kosten. Wenn Sie irgendwelche Fragen oder Sorgen haben, z? Gern Sie bitte nicht, mit unserem Kundendienst-Team in Verbindung zu treten. E-Mails werden Montag bis Samstag beantwortet. Bitte erlauben Sie bis zu 48 Stunden für eine Antwort auf Ihre Nachricht. Bitte kontaktieren Sie uns zuerst, bevor Sie niedrige Bewertungen oder negative / neutrale Rückmeldungen hinterlassen. The item “Cutting 10-12MM Plasmaschneider Inverter/Plasma Cutter Plasma-Ausschnitt 220V” is in sale since Monday, June 29, 2015. This item is in the category “Business & Industrie\Metallbearbeitung & Schlosser.\Schweißen & Löten\Schweißen\Schweißgeräte & -brenner\WIG/TIG-Schweißgeräte”. The seller is “warrenau250″ and is located in Frankfurt. This item can be shipped to European Union member countries.
  • Marke: ridgeyard
  • Herstellernummer: nicht zutreffend
  • MODEL: CUT50
  • Power supply voltage: Single phase 220v±10%
  • Power supply Capacity: 5.5KVA
  • No-load voltage: 220v
  • Protection class: IP21
  • Power factor: 0.93
  • Duty cycle(%): 60

Comments Off | cutting

Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

June 5th, 2018 — 7:50pm
Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

Plasma Cutter Power 50rx 50a Single 220v Vol Ag-60 Torch 1/2 Clean Cut Simadre

SIMADRE PORTABLE 50RX 50 AMP 220V SINGLE VOLTAGE PLASMA CUTTER – 2017 MODEL w POWER 50A RATED NEW HANDLE STYLE TORCH. DIGITAL DIPLAY AND CE. EMC, LVD, C-TICK SAFETY STANDARDS!! BRAND NEW IN THE BOX with ACCESSORIES and FREE BASIC CONSUMABLES! SiMadre CUT 50RX is made by international most advantaged invert technology. The 50/60Hz frequency is inverted to high frequency (frequency is over 100KHz) by V-MOSFET , then step down voltage and recitificate current. The inverter power supply generates powerful DC welding current through PWM technology. Because inverter technology of switch power is used, dimensions and weight of main transformers are reduced substantially and efficiency has increased 30%. Our cutting machine has the following characteristics. Energy-saving and there is no noise. Cutting is smooth and there is no polish demanded. ·Plasma Cutter – Inverter Unit. Power Rated 50A Cutting Torch with Hose. Voltage – 220V Available. Duty Cycle – Cycle 60% at 50 Amps and 100% at 30 Amps. Cutting Thickness – 3/4″ Rated 1″ Serverance Cut. Rated Output Current – 50 Amps under AC 220V. PAPST Advanced German Colling System. Box size: 17 L x 8 W x 16 H. Unit Weight: 20 lbs. Buyers need to install 220v power plug and prepares own air compressor! The item “PLASMA CUTTER POWER 50RX 50A SINGLE 220V VOL AG-60 TORCH 1/2 CLEAN CUT SIMADRE” is in sale since Saturday, June 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Welding & Soldering\Welding\Welders, Cutters & Torches\Plasma Cutters”. The seller is “thetreeonthemoon” and is located in Temple City, California. This item can be shipped worldwide.
  • Brand: SIMADRE
  • Model: SIM50rx
  • MPN: SIM50rx

Incoming search terms:

  • compressor manufacturals mail

Comments Off | plasma

Back to top